/* external file "myvsparmsg.txt" begins */
// begin: Vertical Scroller's Parameters - 
//width of the Scroller in pixels: set to your own;
var mwidth=160; 

//height of the Scroller in pixels: set to your own; 
//larger Messages (exceeding height) will slide OK anyway, 
// but the exceeding height won't show up on Recall!
var mheight=220; 

//BACKGROUND: either color(1) or image(2) ;
//1.Background color: could be like: "#ffff00" or "yellow";
//set it "" for no background color;
var mcolor="";

//or 2.Background image: "imagename.ext";
//leave it "" for no image background;
var mbground="images/bg2.jpg";

//border for scrolling area: 1, ... ;
//set it 0(zero) for no border;
var mborder=0;

//speed in pixels: the higher the faster - set your own!
var mspeed=3; 

//pause between messages in milliseconds: 1000=1s; set to your own; 
var mpause = 2000; 

//speed for exceeding portions in milliseconds: 1000=1s; 
//the higher the slower: set to your own;
//"20" equals the speed to the main portion!
//leave it unchanged otherwise;
var epause=20; 

//1: First message shows up right at top edge (or cell-centered) and pauses;
//0: First message shows up at bottom edge and starts scrolling
//then pauses at the top edge (or cell-centered);
var udopt=0;

//More than one message may reside within scrolling area
//while pausing: 0 (not desired) or 1 (desired); 
//Should one choose this option - value 1, automatically
//a blank space is inserted after each and every message;
//retclass would set the vertical size for this blank space;
var msgnr=0;
if(msgnr==1){
var retclass='class="stileret"';
}

//Cell-centered if single message in the area chosen above;
//0: (not desired) or 1 (desired)
var celcen=1;

//Live speed-change option: 0 (not desired) or 1 (desired);
//vesclass would be the STYLE
//celcolor would be background color
var lsopt = 0;
if(lsopt==1){
var vesclass='class="stileupdn"';
var celcolor='#ccffcc';
}

//Recall Option: 
//set it 0 if not desired and the scroll will go on;
//set it 1 if desired: after a complete cycle the scroll stops
//and you may recall randomly any Message/Image;  
var rcopt=0;
if(rcopt==1){
var cbtxt = new Array();
//MUST BE as many TEXTs as the number of Messages/Images;
//Set your own TEXTs, like Messages Title or what you have in there: 
//cbtxt = ["1-TITLE", "2-Features", "3-Recall Option", "4-Other Possibilities", "5-Check"];
cbtxt=[];
}
//end Parameters 
//===
// begin: Vertical Scroller's Messages/Images - 
var slmg=new Array();

//Stand alone Images only - as many as you'd like;
//If no preloading desired go to Messages and fill in as usual:
//slmg[..]='<img src="image1name.ext" width="..." ... />'; ...
//If you want to preload them all when loading your page: 
//Remove all lines from: //Messages: ... up to ... //end Messages 
//Remove "//" from next 6 lines and set your images in first one;

//slmg=["image1name.ext", "image2name.ext", ...];
//var preloadname = new Array();
//for(pp=0;pp<slmg.length;pp++){
//preloadname[pp]=new Image();
//preloadname[pp].src=slmg[pp];
//slmg[pp]='<img src='+preloadname[pp].src+' />';}
//end stand alone Images 

//Messages: as many as you'd like: set to your own; 
//Every message MUST be set as a continuous string within '...';
//you may split it by using '+ at ends and then ' at continuations;
//Inside any message you MUST use \' in lieu of ' if need be!
//<div class="..." ...> and </div> are recommended    
//for alignment and/or Size, color, ... control;
//Images used within a message - preload is recommended:
//preloadname = new Image();
//preloadname.src = "imagename.ext";
//slmg[..]='< ... ><img ... src='+preloadname.src+' /><...>';

//here is where we open the scroller_body.txt file and read it then we print the lines so the scroller can read them
slmg[0]='<div class="tabc">TEST Product One<br>This product does not have a hyper link '+
'<br />'+
' <em></em></div>';
slmg[1]='<div class="tabc"><a href="">Test Product 2 this Product does </a>'+
'<br />'+
' <em></em></div>';
slmg[2]='<div class="tabc"><font color=red>This Product IS RED and does not have a hyperlink </font>'+
'<br />'+
' <em></em></div>';

// ...
//slmg[...]='...';
//end Messages 
/* end of external_remote file "myvsparmsg.txt" */